ข่าว:

ทดลองใช้งานบอร์ดตะลุง ที่อยู่ในขั้นตอนการกู้คืนข้อมูล เบื้องต้นมีแต่กระทู้ (ข้อความ) กำลังกู้รูปภาพ ไฟล์แนบต่าง ๆ คาดว่าจะทยอยสมบูรณ์ภายในไม่ช้า

Main Menu

จำหน่าย ไมโครคอนโทรลเลอร์ Arduino Sensor Module ในหาดใหญ่ สงขลา

เริ่มโดย Chobui7, 08:32 น. 02 มิ.ย 60

Chobui7

จำหน่าย ไมโครคอนโทรลเลอร์ Arduino Sensor Module ในหาดใหญ่ สงขลา

ราคาไม่แพง ถูกสุดๆ ที่ร้าน 9arduino

https://www.9arduino.com/


.

9Arduino




Smart Car 2WD Robot for Arduino ชุดหุ่นยนต์ รถบังคับ ขับเคลื่อน 2 ล้อ

โครงรถบังคับหรือระบบอัตโนมัติ ขับเคลื่อน 2 ล้อ มีอุปกรณ์น๊อตพร้อมประกอบสามารถนำ อุปกรณ์ไมโครคอนโทรลเลอร์ Arduino โมดูล และ Sensor ต่างๆ ได้ เหมาะกับนักเรียนนักศึกษาที่กำลังศึกษาระบบหุ่นยนต์อัตโนมัติ หรือการบังคับรถผ่านโทรศัพท์มือถือ

ในชุดประกอบด้วย

ล้อยาง 2 ล้อ
Motor Gear 3-12V. 2 ตัว
แผ่น Chasis แบบใส
ล้อหน้าแบบหลายทิศทาง
ชุดน๊อต M3 ทั้งตัวผู้และตัวเมีย
รางถ่าน AA 4 ก้อน 1 ชิ้น
สวิตซ์ เปิดปิด 1 ตัว

https://www.9arduino.com/p/232



ปลาดุกทะเลา

Arduino Uno R3 SMD ราคาถูก พร้อมสาย USB  ร้านอยู่หาดใหญ่ จังหวัดดสงขลา

สั่งซื้อได้ที่ : https://www.9arduino.com/

Arduino Uno R3 SMD ราคาถูก พร้อมสาย USB
Arduino Uno R3 SMD รุ่นนี้มีความสามารถเหมือนกับ Arduino Uno R3 ทุกประการ ทุกอย่าง 100% สามารถใช้ทดแทนกันได้ แต่ราคาถูกกว่าเพราะใช้ ไมโครคอนโทรนเลอร์ แบบ SMD แทนแบบ DIP และเปลี่ยน USB to TTL เป็น Chip CH340G ซึ่งทำให้มีราคาถูกลง รองรับกับการทำงานทุก Windows

สามารถดาวน์โหลด Driver CH340G ได้ที่ : http://arduino.nisit.net/download/CH341SER.zip
และวิธีการติดตั้ง : https://www.9arduino.com/b/6

รายละเอียด Arduino Uno R3 SMD

ชนิดไมโครคอนโทรนเลอร์   ATmega328 (ชนิด SMD)
แหล่งจ่ายไฟ (ที่แนะนำ)                  7-12V
ขา digital I/O   14 ขา (รอบรับ PWM 6 ขา)
ขา Analog   6 ขา
Flash Memory   32KB (ATmega328)
SRam   2KB (ATmega328)
EEPROM   1KB (ATmega328)
Clock Speed   16 MHz
ความกว้าง   68.6 mm
ความยาว   53.4 mm
น้ำหนัก   25 g


สินค้า 1 ชุดประกอบด้วย

บอร์ด Arduino Uno R3 SMD จำนวน 1 ชิ้น
สาย USB ยาว 30 cm จำนวน 1 ชิ้น


สั่งซื้อได้ที่ : https://www.9arduino.com/




9Arduino

DFPlayer Mini MP3 Player DFRobot
Modules Mp3 ขนาดเล็ก ใช้ร่วมกับ Arduino สามารถเล่นเพลงต่อหูฟัง ต่อขยายไปยังลำโพง สามารถควบคุม สั่งการผ่าน Arduino

ข้อมูลเพิ่เติม

รองรับ Micro SD card FAT16, FAT32 file system
supports sampling rates (KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
24-bit DAC output, support dynamic range: 90dB, SNR support: 85dB
fully supports FAT16, FAT32 file system, maximum support 32G TF card, support U disk to 32G, 64M bytes NORFLASH
a variety of control modes are available. IO control, serial port, AD button control mode
radio spots language function, you can pause the background music being played. Advertising finished playing background sound continues to play back
the audio data is sorted by folder, supports up to 100 folders, folders can be assigned to every 255 Tracks
30 level adjustable volume, six adjustable EQ
สินค้า 1 ชุดประกอบด้วย

DFPlayer Mini MP3 Player DFRobot จำนวน 1 ชิ้น

https://www.9arduino.com/product/95/dfplayer-mini-mp3-player-dfrobot


9Arduino

CNC Shield V3 for Arduino Uno

CNC Shield สำหรับ Arduino Uno R3 เพื่อให้ Arduino ของเราสามารถทำงานเป็น อุปกรณ์ควบคุม CNC ได้ ทำให้การสร้างเครื่อง CNC สามารถทำได้ง่าย ไม่กี่ชั่วโมงไม่ต้องปวดหัวกับการต่อวงจร เพียงติดตั้ง firmware GRBL for Arduino สามารถควบคุม Stepper motor ได้ 4 แกน ควบคุมมอเตอร์ได้ 4 ตัว โดยการใช้ไดร์ A4988 มาเสียบ บน CNC Shield ทำให้เราสามารถสร้างเครื่อง CNC ได้ทันทีไม่ว่าจะเป็น cnc งานเจาะตัด ด้วย Routers หรือ laser ก็เป็นเรืองงานทันที

https://www.9arduino.com/p/258


Chobui7

Connector 510 ขั้ว 510 ขนาด 22mm

คอนเนคเตอร์ 510 ขนาด 22mm สำหรับไปใช้ในงานต่างๆ ทนความร้อนสูง เหมาสำหรับนัก DIY ที่ต้องการประดิษฐ์ สิ่งของไว้ใช้เอง เป็นต้น ทนความร้อนสูง ขั่วสปริงอย่างดีไม่จมง่าย

Dimensions

Depth : 22 mm
Height : 11.2 mm
Width : 22 mm

สินค้าประกอบด้วย
- Connector 510 ขั้ว 510 ขนาด 22mm จำนวน 1 ชิ้น

https://www.9arduino.com/p/538


Chobui7

CNC Shield V3 for Arduino Uno



https://www.9arduino.com/product/258/cnc-shield-v3-for-arduino-uno

CNC Shield สำหรับ Arduino Uno R3 เพื่อให้ Arduino ของเราสามารถทำงานเป็น อุปกรณ์ควบคุม CNC ได้ ทำให้การสร้างเครื่อง CNC สามารถทำได้ง่าย ไม่กี่ชั่วโมงไม่ต้องปวดหัวกับการต่อวงจร เพียงติดตั้ง firmware GRBL for Arduino สามารถควบคุม Stepper motor ได้ 4 แกน ควบคุมมอเตอร์ได้ 4 ตัว โดยการใช้ไดร์ A4988 มาเสียบ บน CNC Shield ทำให้เราสามารถสร้างเครื่อง CNC ได้ทันทีไม่ว่าจะเป็น cnc งานเจาะตัด ด้วย Routers หรือ laser ก็เป็นเรืองงานทันที

Features:

GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others) (Not Included)
PWM Spindle and direction pins
4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins A4 and A3)
2 x End stops for each axis (6 in total)  + one Probe
Coolant enable output
Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
Compact design.
Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
Please note that this is an un-assembled kit and needs soldering.